Customized Tricone Roller Bit Drilling Through Soft - Ultrahard Formations

A Full Range Of Sizes Tricone Roller Bit Drilling Through Soft To Ultrahard Formations

Click here for catalogueTCI DRILL BIT.pdf

Hard to Very-Hard Formation

Application : For use in moderately abrasive consolidated formations with compressive strength ranging between 140 – 485 Mpa such as hard limestone, quartzite, granodiorite, and medium grade metamorphic formations

Cutting structure: These bits are characterized by closely spaced conical or spherical inserts with medium to low projection. This configuration promotes good penetration rates in hard, consolidated and very abrasive formations. Smaller carbide inserts are provided on the gage and inner rows or hard metal is deposited in the nose area to contain shell erosion and improve performance.

• Compression Strength: 60,000 – 100,000 psi
• Drilling Speeds: 50 – 90 rpm
• Jet Circulation: All sizes
• Weight on Bit (WOB): 4,000 – 7,500 lbs/in of bit diamete

Click here to know how to select bits ABOUT IADC.pdf

CUTTING SELECTION GUIDE

Advantage:

1. Strictly select the material to ensure the reliable quality. Bad steel and tungsten carbide inserts won't be used.

2. Strictly act according to the ISO9001 standard, and control by full-scale inspection.

3. Sales and support people are highly trained in the latest rock drilling technology and can offer you expert advice on what products will best fit a specific end use application.

The above represents commonly available sizes and types, we do produce other sizes and types of rock drill bits which do not appear on . Please contact us for more information.